Table of Contents
Advertisement
5.1 Configuring PoE Settings
Select PoE Management > PoE Settings, you can configure power settings, power status, port
status and control.
Step 1
In Power Settings, you can set the total power of the 4 ports, and configure reserved
power and alert power.
Step 2
In Power Status, you can view consumed power, remaining power and reserved power.
Step 3
In Port Status and Control, select from the list below the PoE Management to enable or
disable PoE of the corresponding port.
Click OK.
Step 4
Parameter
Power settings
Power status
5 PoE Management
Figure 5-1 PoE settings
Table 5-1 Description of PoE parameters
Description
Total power
Displays the total PoE power.
Reserved power
Configure the reserved PoE power.
Alert Power
Configures the alert PoE power.
Consumed power
Displays the current PoE power consumed by all ports.
Remaining power
Displays the current remaining PoE power.
22
Advertisement
Table of Contents
