Table of Contents
Advertisement
In WRR mode, the weight ratio of the priority queue is
Queue0:Queue1:Queue2:Queue3=1:2:4:8.
Step 3
Click OK.
7.4 Configure Port Speed Limit
Step 1
Select Control Policy > Port Speed Limit.
Step 2
Click Add.
Step 3
Enter the Interface, Direction, and CIR.
The values of Direction include In and Out.
Step 4
Click OK.
7.5 Configure Storm Control
The broadcast frames on the network are forwarded continuously, which affects the proper
communications, and greatly reduces the network performance. The storm control can limit the
broadcast flows of the port and discard the broadcast frames once the flow exceeds the specified
threshold, which can reduce the risk of the broadcast storm and ensure the network proper
operation.
Step 1
Select Control Policy > Storm Control.
Step 2
Click Add.
Step 3
Enter the Port, Type, and Speed.
Step 4
Click OK.
Figure 7-2 Add port speed limit
31
Advertisement
Table of Contents
