Step 3
Click
Step 4
Click OK.
4.4 Configuring STP
4.4.1 STP
Step 1
Select Network Settings > STP.
Step 2
Click
Step 3
Select Working Mode.
Click Advanced, and then configure the advanced parameters.
Step 4
Parameter
Hello timer
Max. aging time
next to IGMP Leave Group Messages to enable the function.
next to STP to enable STP function.
Figure 4-4 Configure STP
Table 4-3 Description of the advanced parameters
Description
The period of root bridge sending BPDU. The time ranges from 1
second to 10 seconds.
The aging time of current BPDU. The time ranges from 6 seconds to
40 seconds.
14