Table of Contents
Advertisement
Related Operations
● Delete static MAC address: Select a MAC and click Delete.
● Refresh the MAC address list: Click Refresh or enable Auto Refresh.
● Clear dynamic MAC address: Click Clear Dynamic MAC.
● Search for MAC address and port: Enter the MAC address or port number on the upper-right
corner, and then click Search.
4.8.2 Filtering Port MAC
After enabling port MAC filtering, the following two MAC devices can communicate with the port.
● Devices in MAC allowlist.
● Static MAC devices changing from the dynamic MAC devices.
After enabling port MAC filtering, the port cannot access the managing address or login.
Step 1
Select Network Settings > MAC Table > MAC Filtering.
Step 2
Select the port.
Step 3
Click
1) Select one record, and Select
2) Click OK. The type changes from Dynamic to Static.
Static MAC devices can communicate with the port normally.
3) Click Add.
4) Set MAC address and VLAN.
5) Click OK.
Figure 4-9 Add MAC table
Figure 4-10 related operations
to enable the port.
20
next to Reserved.
Advertisement
Table of Contents
