Configuring Pd Alive - Dahua PFS4307-4ET-96 Web Operation Manual

5.6 Configuring PD Alive

With PD Alive enabled, you can monitor PD and keep it online, and check the status of PD devices
every 60 s. If there is no data transmission, the PoE port will be automatically powered off and
restarted.
You can only use one between Legacy Support and PD Alive each time.
Step 1 Select PoE Management > PD Alive.
Step 2 Click
Step 3 Click OK.
Figure 5-3 Legacy support
of the corresponding port to enable PD alive.
Figure 5-4 PD alive
25