General Operations; Single Arming And Disarming - Dahua DHI-ARA3000H-FW2 User Manual

The user in level 2 or 3 has the permission to arm and disarm the system. This section uses end user's
operation on DMSS as an example.
Prerequisites
● Make sure that you have added a hub before performing configurations.
● Make sure that the hub has a stable internet connection.
● Make sure that the hub is disarmed.
Background Information
You can manage alarm hubs and accessories, and perform operations such as arming and disarming,
configuring alarm devices.
Procedure
On the hub screen, tap Accessory to add the accessories. For details on adding the
Step 1
accessories, see the user's manual of the corresponding device.
Step 2 Arm and disarm the detectors in a single area or all the areas through manual or scheduled
operations.
● Single Arming and Disarming: Arm and disarm the detectors in a single area. For details,
see "6.1 Single Arming and Disarming".
● Global Arming and Disarming: Arm and disarm the detectors in all the areas. For details,
see "6.2 Global Arming and Disarming".
● Manual Arming and Disarming: Arm the security system through the DMSS app, keypad
or keyfob.
● Schedule Arming and Disarming: Arm and disarm the detectors by schedule. For
details, see "6.4 Scheduled Arming and Disarming".

6.1 Single Arming and Disarming

You can arm and disarm the detectors in a single area.
Step 1 On the hub screen, tap Area.
Tap an area, and then select from Home, Away, Disarm, and Disable in the pop-up
Step 2
window.
● Home: An arming mode that allows you to arm the system when inside the area of the
alarm system.
● Away: Arm the system when you leave the area of the alarm system.
● Disarm: Turn the security system off. The opposite of arming.
● Disable: Close the current screen.

6 General Operations

37
User's Manual