Entrusting Devices In Batches; Deleting Users; Cancelling To Share The Devices - Dahua DHI-ARA3000H-FW2 User Manual

After an entrusting request has been successfully sent, a message will pop up on the Home
screen. You need to wait for a response from the installer, which will be displayed on the
Me > Mailbox > Personal screen.
Related Operations
● To change permissions, go to the Entrust to Company screen, and then tap Change
Permissions.
● To withdraw entrusting permissions, go to the Entrust to Company screen, and then tap
Withdraw.
● To renew entrusting periods, go to the Entrust to Company screen, and then tap Renew.

5.4.1.2.2 Entrusting Devices in Batches

You can entrust devices to one enterprise in batches.
On the Home screen, select Me > Batch Entrust.
Step 1
Step 2 On the Select Device screen, select the devices to be entrusted, and then entrust those to
the enterprise. The process for entrusting multiple devices is the same as entrusting a
single device. For details, see "5.4.1.2.1 Entrusting Device One by One".

5.4.2 Deleting Users

For DMSS admin users, you can delete both installers and DMSS general users.

5.4.2.1 Cancelling to Share the Devices

For DMSS admin user, you can delete DMSS general users by cancelling to share the devices with
them on the Device Sharing screen. For details on going to Device Sharing screen, see "5.4.1.1
Adding DMSS General Users". This section uses methods on
example.
On the Home screen, tap
Step 1
Figure 5-5 Entrust devices in batches
next to a device, and then tap Device Sharing.
34
User's Manual
> Device Sharing as an