Design; Appearance - Dahua DHI-ARA3000H-FW2 User Manual

2.1 Appearance

No. Name
1 Indicator
2 Ethernet cable socket
3 Slot for micro SIM 1/2
4 Tamper button
5 Power cable socket
6 AP

2 Design

Figure 2-1 Appearance
Table 2-1 Structure
Description
● Flashes green slowly: Reduced sensitivity mode.
● Flashes green: The hub starts working.
● Solid yellow: Failed to connect to the cloud.
● Solid green: Disarming mode.
● Solid blue: Arming mode.
● Flashes red: Alarm event was triggered.
● Flashes yellow: Detected a malfunction.
● Flashes blue: Running AP configuration or the hub is
pairing with peripherals.
● Flashes blue quickly: Card issuing mode.
Connect the hub to the Ethernet.
Install main card to the first slot, and standby card to the
second slot.
● Support dual SIM cards and single standby.
● SIM cards allow the hub to use cellular data, and push
alarm notifications.
● SIM cards will not work until network configuration has
been completed.
● SIM function is only available on select models.
When the tamper switch is released, the tamper alarm will be
triggered.
Insert power cable.
Turn on AP, the phone will connect to the hotspot from the
hub, and then sync Wi-Fi username and password to the hub.
7
User's Manual