Step 9
Connect to the network.
1) Select Wi-Fi.
Make sure that your phone and the device are connected to the same network.
2) Enter Wi-Fi password, and then tap Next.
3) Flip the DIP switch from AP to STA, and then tap Next.
4) Wait for device to complete network configuration.
Step 10 Tap Completed.
4.2.1.3 Adding by LAN Searching
You can search for devices and add them. Make sure that your phone and the devices are connected
to the same network.
Step 1
On the Home screen, tap
Step 2
Tap
Step 3
Tap
Figure 4-5 Add through AP configuration
Figure 4-6 Connect to the network
, and then it goes to Sites screen.
on the upper-left corner to switch to Device mode.
to add a device.
17
User's Manual