Configuring The Hub - Dahua DHI-ARA3000H-FW2 User Manual

Parameter
GSM Connection Status
Wi-Fi Connection Status
Network Cable Connection
Status
SIM Card Status
Program Version

4.6.2.2 Configuring the Hub

On the Hub screen, select
Parameter
Global
Arming/Disarming
Schedule
Arming/Disarming
Ringtone Setting
LED Indicator
Test Mode
Reduced Sensitivity
Mode
Description
Internet connection status of the hub via SIM card, Wi-Fi, and
Ethernet.
●
: Connected.
●
: Disconnected.
Connection status of the SIM card.
●
: SIM card 1 is active.
●
: SIM card 2 is active.
●
: No SIM card.
The program version of the hub.
> Hub Setting to configure the parameters of the hub.
Table 4-3 Hub parameter description
Description
Arm or disarm all the detectors in all the areas with one tap.
Arm or disarm the areas by schedule.
● Area: Select the area in which the hub operates.
● Command setting: Select an armed mode as needed by tapping
Home, Away, or Disarm.
● Time: Select the time period in which the hub operates.
● Repeat: Copy the arming or disarming schedule.
● Force Armed: You can arm the system when errors happen in
zones.
The ringtone when entering or exiting the arming mode.
LED Indicator is enabled by default. For details on indicator behavior,
see "2.1 Appearance".
● If LED Indicator is disabled, the LED indicator will remain off
regardless of whether the hub is functioning normally or not.
● The function is only available when the version of the DMSS app is
1.96 or later, and the hub is V1.001.0000000.4.R.211014 or later.
Tap Start to test the status of the accessories connecting to the hub in
different areas, and then tap Stop to complete detection.
Enable Reduced Sensitivity Mode, and then the hub's transmit power
will be reduced.
The function is only available when the version of the DMSS app is 1.97
or later, and the hub is V1.001.0000000.6.R.211215 or later.
26
User's Manual