Related Manuals for Dahua DH-PFM889 Series
Summary of Contents for Dahua DH-PFM889 Series
- Page 1 DH-PFM889 Series Wireless Device Quick Config Manual V1.0.0 Zhejiang Dahua Vision Technology Co., LTD...
- Page 2 Important Safeguards and Warnings Please read the following safeguards and warnings carefully before using the product in order to avoid damages and losses. Attentions: Do not expose the device to lampblack, steam or dust. Otherwise it may cause fire or electric shock.
- Page 3 Table of Contents Cable Connection ..................... - 3 - Typical Working Mode ..................- 4 - Device Config ....................- 5 - Appendix 1 Technical Specifications .............. - 9 -...
-
Page 4: Cable Connection
1 Cable Connection Please refer to Figure 1-1 for the connection of DH-PFM889. Figure 1-1 Please refer to sheet 1-1 for more details about the port. Device model Port Port name Connection and function DH-PFM889-I 3 RJ45 ports Connect to the “PoE” on the PoE power device via twisted pair, and provide power... -
Page 5: Typical Working Mode
2 Typical Working Mode The product can provide excellent wireless signal coverage, which can be widely applied in various indoor scenes, such as office, meeting room, coffee shop, restaurant, hospital lobby, airport hall and other areas with high people density. ... -
Page 6: Device Config
3 Device Config Precondition Please refer to the cable connection figure to connect the device to mainframe and power it on. Operation Steps It is to configure access point device via the following steps, the terminal users can be connected and communicated after config is completed. - Page 7 Figure 3-2 Step 4 Click the wizard column and the interface is shown as below. Here you can modify the router password and select interface language. Figure 3-3 Step 5 Click “Next” and the interface can be used to set the network working mode of the device. Please use bridge mode if the device is used as access point, besides, please modify LAN IP in order to avoid conflict.
- Page 8 Figure 3-4 Step 6 Click “Next” and the interface is used to set the wireless mode of the device. The ESSID of device is used for client connection, the mode is selected as access point, the channel is advised to select auto, and it is also advised to use WPA2-PSK encryption, the default password is 1234567890abc;...
- Page 9 Figure 3-5 Attention: Please configure different “channel” for different access points when it is deployed with multi access ponit, which is to avoid the disturbance between devices. Please turn off TDMA function when it is connected to general clients such as laptop, mobile phone and wireless camera.
-
Page 10: Appendix 1 Technical Specifications
4 Appendix 1 Technical Specifications Item DH-PFM889-I DH-PFM889-IM IEEE802.11 b/g/n IEEE802.11 a/n/ac（2T2R） Standard IEEE802.11 b/g/n（2T2R） （2T2R） 2400~2500MHz （ support frequency extension, extension range 2312~2732MHz） Working frequency 5745~5825MHz （ support frequency extension, extension range 4900~6100MHz）(only supported by DH-PFM889-IM) Antenna Built-in Omnidirectional antenna: gain 3dBi Wireless Output power 27dBm... - Page 11 If there is any uncertainty or controversy, please refer to the final explanation of us. Please visit our website for more information. Dahua Technology CO., LTD. Address：No.1199 Bin’an Road, Binjiang District, Hangzhou, PRC. Postcode: 310053 Tel: +86-571-87688883 Fax: +86-571-87688815 Email:overseas@dahuatech.com...