Lockout Menu - heat-timer ETS Installation And Operation Manual

Lockout Menu
The Lockout menu is used to reset system lockouts.
NOTE: Under specific conditions, the control triggers the alarm and logs the event in the Alarm Log (see
"Alarm Log" on page 38).
Reset Lockout
Selections: RESET
Menu Path: Lockout
Description:
The TMC Lockout outputs energize whenever the System Temperature
rises above the Alarm Limit for the Trigger Delay period.
To reset the lockout, the conditions causing the lockout must be corrected
first. Then, the lockout can be reset using the Reset Lockout menu. If the
lockout was reset before the conditions are corrected, the lockout output
will immediately be re‐activated.
Heat‐Timer Corp.
Default: N/A
ETS Startup 39
059326‐00 Rev D