heat-timer ETS Installation And Operation Manual page 36

36 ETS Installation and Operation Manual
Select Days
Selections: Weekdays, Weekends, Everyday, or specific days
Menu Path: /Schedules > Temp. Schedules > Select Days
Description:
Select the days or group of days (weekends, weekdays, or everyday) to
apply the schedule.
Set Schedule Start Time
Selections: Numerical values for Time
Menu Path: /Schedules > Temp. Schedules > Select Days > Set SCH‐1 Start
Time
Description:
Specifies the schedule start time. Four Schedule Start Times can be set for
each day. Each start time has its own temperature setting (see "Set
Schedule Temperature" on page 36).
Set Schedule Temperature
Selections: 40°F/4.5°C to 200°F/93°C
Menu Path: /Schedules > Temp. Schedules > Select Days > Set SCH‐1 Start
Time > Set SCH‐1 Override
Description:
The the Temp. setting overrides the Setpoint and sets the system temperature to the entered value. The new
Schedule Setpoint temperature is displayed on the screen with an asterisk (for example, 130F*).
All Temp. settings for each day of the week must be set to guarantee that the default setting is replaced.
059326‐00 Rev D
Default: 0°F/-18°C
Heat‐Timer Corp.