Tool Bar > Online Help; Function Tree - D-Link DGS-1210/ME User Manual

4 Configuration
HTTP: Backup or upgrade the firmware to or from your local PC drive.
Click Backup to save the firmware to your disk.
Click Browse to browse your inventories for a saved firmware file.
Click Upgrade after selecting the firmware file you want to restore.
TFTP: Backup or upgrade the firmware to or from a remote TFTP server. Specify TFTP Server IPv4 or IPv6
Address and File Name for the configuration file you want to save to / restore from. The maximum Telnet
Server connection is 4.
Click Backup to save the firmware to the TFTP server.
Click Upgrade after selecting the firmware file you want to restore.
Tool Bar > Online Help
The Online Help provides two ways of online support:
D-Link Support Site: This will lead you to the D-Link website where you can find online resources such as
updated firmware images.
User Guide: This can offer an immediate reference for the feature definition or configuration guide.
Click Apply to make configuration effected.

Function Tree

All configuration options on the switch are accessed through the Setup menu on the left side of the screen.
Click on the setup item that you want to configure. The following sections provide more detailed description
of each feature and function.
DGS-1210 series Metro Ethernet Managed Switch User Manual
Figure 4.9 – Tool Menu > Firmware Backup and Upgrade
CAUTION: Do not disconnect the PC or remove
the power cord from device until the upgrade
completes. The Switch may crash if the
Firmware upgrade is incomplete.
Figure 4.10 – Online Help
1 1
1 1