Specifications; Spare Parts; Symbols And Conventions - Labnet Prism Mini User Manual

Questions and Service:
Should you have a question about the centrifuge or require service for the unit,
please use the contact numbers listed below. Do not send in a unit for service
without first calling to obtain a repair authorization number and a
decontamination form. Should the centrifuge require service, be sure to
decontaminate it and enclose the decontamination form. The unit should be
properly packed to avoid damage. Any damage resulting from improper
packaging shall be the responsibility of the user.

Specifications:

Dimensions... ........5.2" x 5.2" x 4.4" (inches) / 13.2 x 13.2 x 11.2 cm
Weight.................1.2 lbs / 0.55 Kg
Electrical ............... AC 230V, 50/60Hz, 65mA
Fuse ..................... 0.5A, 250V (F)
Speed ................... 6000rpm
RCF ...................... 2000 x g
Environmental conditions
- Indoor use only
- Altitude up to 2000m
- Temperature 5C to 40C
- Maximum relative humidity 80% for temperature up to 30C decreasing linearly
to 50% relative humidity at 40C
- Pollution degree 2

Spare Parts:

10588W005
10588W015
10588W016
COM 014-1
COM 015

Symbols and Conventions:

The following chart is an illustrated glossary of the symbols that may be used in
this manual or on the product.
The electrical warning indicates the presence of a potential hazard which could
result in electrical shock.
CAUTION This symbol refers you to important operating and maintenance
(servicing) instructions within the product Instruction Manual. Failure to heed this
information may present a risk of damage or injury to persons or equipment.
This symbol identifies a Protective Earth (PE) terminal, which is provided for
connection of the supply system's protective earth (green or green/yellow)
conductor.
AC 115V 50/60Hz, 130mA
Lid, Handle
Rotor, Spin Strip
Rotor, 8 Places
Motor 115V
Motor 230V
3