Table of Contents
Advertisement
UM-PM-029
DA9213, DA9214, and DA9215 Performance
Boards
a) Synchronize Panel from Device
Reads all the register contents of the device and updates the panel to match.
b) Synchronize Device from Panel
Writes all the device registers to match the panel (refresh operation).
c) Reset Configuration
Resets the registers to values specified in configuration file.
d) Clear all read-back indication
Sets all read-back indicators to 0.
e) Read all read-back
Reads all registers, comparing with the panel controls.
6.4
Control Tabs
The tabs DA921X Control, DA921X Configuration, and DA921X Buck all have the same format.
Each register cluster comprises a control with a mixture of:
1. Boolean toggle buttons.
2. Multi-value ring controls or slide controls.
3. A hex indicator showing the total equivalent value.
4. A read-back indicator showing the current contents of the register. The read-back indicator is
labeled with the register number in both decimal and hex.
Read-back indicators can be switched individually by clicking on the x to decimal, octal, hex, or
binary, or they may all be changed at once between hex and binary by using the Settings, Binary
Indicators menu item.
User Manual
Revision 2.0
25-Feb-2022
CFR0012
15 of 37
© 2022 Renesas Electronics
Advertisement
Table of Contents
