Table of Contents
Advertisement
Chapter 3
3.5 Motor control interfaces
Figure 3
Note
R20UT0883ED0100 Rev. 1.00
User Manual
The Starter Kit is equipped with two 40-pin interfaces to connect it with
application hardware e.g. the forthcoming "motor control board" or a costumer
specific application boards.
Figure 3-2 shows a proposal of possible pin function configuration for a motor
control application and it shows the shared onboard functions.
Motor control 40 pin interface
The outputs of the mounted V850E2/Px4 are multiplex with different functions.
This port configuration is only a proposal.
Communication
19
Advertisement
Table of Contents
