UM-PM-029
DA9213, DA9214, and DA9215 Performance
Boards
NOTE
After the installation has been completed you need to restart your computer.
5. Plug in the USB cable so that Windows detects the USB device. A prompt for the drivers, which
should be automatically located in the Driver_PID-1011 directory of the media, appears. If this
does not happen automatically, open the Device Manager:
6. Double-click on the unknown Dialog device, and update the driver as shown:
7. Browse to the Driver_PID-1011 directory of the media. When installed correctly, Dialog USB
Driver is listed on the Device Manager.
User Manual
CFR0012
Revision 2.0
7 of 37
25-Feb-2022
© 2022 Renesas Electronics