Table of Contents
Advertisement
UM-PM-029
DA9213, DA9214, and DA9215 Performance
Boards
6
Configuration Tab
The software is launched by clicking the shortcut in the Start menu.
The optimum setting for the PC display size is 1024x768 pixels or above. The font size on the PC
display should be normal (95dpi). It is important to note that a display size other than the
recommended setting may affect the way in which the tabs appear.
A pop-up for selecting a configuration file appears on start-up. If you do not have any to load, click
Cancel.
Figure 5
appears, with the USB OK? LED lit if the USB cable is correctly connected and the USB
interface is functioning.
Figure 5: Initial Interface
Three tabs are available across the top:
1. Control, for the main settings of I/Os, the interface and the status/event registers.
2. Configuration, for advanced DA9213, DA9214, or DA9215 configuration.
3. Buck, which includes all the buck settings (output voltages, operating modes)
As the software has been developed to evaluate DA921X and DA9063 (main PMIC) separately or
together on the same PCB, the specific DUT can be configured in the drop-down menu at the bottom
left of the screen. By default this is DA921X only as showwn in
Figure
6.
User Manual
Revision 2.0
25-Feb-2022
CFR0012
12 of 37
© 2022 Renesas Electronics
Advertisement
Table of Contents
