Chery A1 2009 Service Manual page 1014

11. To install the glass, align the reference marks on
the glass and the body and then lightly press the
glass into the body opening.
12. Apply the bonding agent on the edges of the glass
with a scraper.
13. Remove any excessive bonding agent with a
scraper.
14. Clamp the glass until the bonding agent has hard-
ened.
15. Check for water leakage:
• Perform the leakage test after the hardening
period.
• Seal any leaks with the proper sealant.
16. Install the rear window molding:
• Install the rear window outer lower molding on the body and tap it lightly to fasten it.
• Connect the leads of the rear window defroster.
Chery Automobile Co., Ltd.
STATIONARY GLASS
BESM150018
15
245
15–