Suzuki DF40A Manual page 37

4) Remove lower mount bracket (2), shims (3), and
washer (4) from the steering shaft.
2
5) Lift steering bracket (5) upward to remove from
swivel bracket.
Remove washer (6) and upper bushing (7).
6) Remove swivel bracket seal (8) and lower bushing
(9).
7) Remove circlip (10) and push out tilt cylinder upper
rod (11).
4
3
IAJ611210080-02
5
6
7
IAJ611210081-01
9
8
IAJ611210082-01
11
10
IBJ611210018-02
8) Remove the two bolts (12) securing PTT lower shaft
to STBD and PORT clamp brackets.
12
9) Using flat blade screw driver, drive locking edge of
lock washer (13) to clamp bracket side.
10) Remove the two STBD motor mounting bolts (14).
Remove the clamp bracket shaft nut (15) and
washer.
11) Slide STBD clamp bracket (16) off clamp bracket
shaft.
12) Remove the PTT unit (17).
17
Housing and Bracket:
12
IBJ611210011-05
13
15
14
IBJ611210037-01
16
IBJ611210038-01
2A-11