Suzuki DF40A Manual page 22

1G-3 Fuel System:
3) Unfasten cable tie (2).
2
4) Disconnect the three fuel injector connectors (3).
5) Remove the two bolts (4) and the fuel delivery pipe
(5) (with the fuel injectors).
CAUTION
!
A small amount of fuel may be released when
the fuel injector is removed from delivery
pipe.
Place a shop cloth under the fuel injector
before removal to absorb any fuel released.
Dispose of the fuel soaked cloth in
appropriate container.
IBJ611170007-01
3
3
IBJ611170008-01
4
5
4
IBJ611170009-01
6) Remove each injector (6) from the delivery pipe.
Installation
Installation is in the reverse order of removal with special
attention to the following steps.
NOTICE
Do not re-use O-ring and cushion once
removed.
Always use new parts.
1) Replace the injector O-ring (1) with a new one using
care to avoid nicks or cuts during installation.
Install grommet (2) to injector.
1 2
"A"
"A": Apply fuel to O-ring.
2) Replace the injector cushion (3) with a new one and
install to the intake manifold.
6
IBJ611170010-01
3
IBJ611170002-01
3
IBJ611170011-01