Suzuki DF40A Manual page 32

2A-6 Housing and Bracket:
Engine Holder to Oil Pan
• Apply engine oil to O-rings (1), then install O-rings to
oil strainer (2).
• Install oil strainer to engine holder, then tighten bolts
securely.
1
2
• Install the two dowel pins (3), gasket (4) and exhaust
silencer (5) to oil pan.
NOTICE
Do not reuse gasket. Always assemble with a
new gasket.
3
5
4
• Install engine holder (6) to oil pan (7), then securely
tighten it with engine holder bolts (8).
8
2
IAJ611210054-02
3
IAJ611210055-01
6
8
7
IAJ611210056-01
Upper Mount and Mount Cover
• Assemble these items in the following sequence:
Place the washers (1), upper mounts (2), "R" upper
thrust mount (3), upper thrust mount (4) on upper
mount bolts (5).
5
1
2
3
• Place the "F" upper thrust mounts (6) into position.
6
8
IAJ611210057-02
5
1
2
4
IBJ611210029-02
6
IBJ611210030-01