Table of Contents
Advertisement
7
Optical Specifications
7.1
Basic Optical Specifications
Scanning Technology
Number of effective pixels
*1
Image capture speed (
Focal distance
Illumination light source
(LED × 2)
*1 The fastest speed of image capture
7.2
Focal Plane
The focal plane is located at 35mm from the front of the scanner. This is the position where the optical
performance is at its best. It is recommend to set the barcode at this position, especially when reading
a high resolution or a low PCS barcode. It is possible to read up to 80mm wide barcodes at this
distance.
7.3
Optical Axis and Dead Zone
The optical axis is at 6.25±1mm from the bottom of the scanner. Please make sure to position the
barcode in this area and respect the possible tolerance. Make sure to tilt the barcode at least by ±10°.
The scanner may be unable to read when the barcode has a tilt angle between 0° and ±10° due to
specular (mirror like) reflection.
SPECIFICATIONS MANUAL
Item
Linear imager sensor
Line sensor
)
Scan speed
Distance from the front edge of scanner
Red LED
Figure 2: Reading distance
Barcode
Figure 3: Optical axis and Dead zone
Focal Plane (F.P)
35
[Unit: mm]
Optical axis
[Unit: mm]
F-100 SR
1st
Characteristics
-
2496 x 1 pixels
700±10% scan/s
35mm
624nm
8
Advertisement
Table of Contents
