KROHNE IFC 020 K Installation And Operating Instructions Manual page 28

Fct. Text
3.05 USER UNIT
→ TEXT VOL.
→ FACT. VOL.
→ TEXT TIME
→ FACT. TIME
3.06 APPLICAT.
→ FLOW
3.07 MEASURING POINT
3.08 COM
4/9
Description and settings
Set any required unit for flowrate and counting
Set text for required flowrate unit (max. 5 characters)
Factory-set: "Liter" or "MGal".
Characters assignable to each place:
• A-Z, a-z, 0-9, or " – " (= blank character).
Press ↵ key to transfer to subfunction "FACT. VOL."
Set conversion factor (F
Factory set "1.00000 E+3" for "Liter" or "2.64172E-4" for "US MGal"
(exponent notation, here: 1
Factor F = volume per 1m
M
Setting range
Press ↵ key to transfer to subfunction "TEXT TIME".
Set text for required time unit (max. 3 characters)
Factory-set: "hr" (=hour).
Characters assignable to each place:
• A-Z, a-z, 0-9, or " – " (= blank character).
Press ↵ key to transfer to subfunction "FACT. TIME"
Set conversion factor (F
Factory-set: "3.60000 E+3" for "hour" or "8.64000 E+4" for "day"
(exponent notation, here: 3.6
Set factor F
T
Setting range
• 1.00000 E-9 to 9.99999 E+9 (= 10
Press ↵ key to return to Fct. 3.05 "USER UNIT".
Set overload point for A/D converter
• STEADY (150% of Q
Press key ↵ to return to Fct. 3.06 "APPLICAT.",
Set measuring point no.
Factory setting: ALTOMETER
Characters assignable to each place:
• A-Z, a-z, 0-9, or " – " (= blank character).
Press ↵ key to return to Fct. 3.07 "MEASURING POINT"
Set comminucation interface
• OFF (switched off)
• HART (HART-interface switched on)
• KROHNE (RS 485 interface switched on)
• Address:"HART" 00-15 / "KROHNE" 000-239
• BAUD RATE: -1200
(appears with selection "KROHNE" only)
Press key ↵ to return to Fct. 3.08 "COM".
Installation and operating instructions IFC 020
) for volume
M
3
10 or 2.64172
x
3
.
• 1.00000 E-9 to 9.99999 E+9 (= 10
) for time
T
3
10 or 8.64
x
in seconds.
-9
) • PULSATING (1000% of Q
100%
-2400 -4800
-4
10 ).
x
-9 to 10 +9 )
-4
10 ).
x
+9
to 10 )
100%
-9600 -19200
)