KROHNE OPTISWIRL 4200 Handbook
  1. Manuals
  2. Brands
  3. KROHNE Manuals
  4. Measuring Instruments
  5. OPTISWIRL 4200
  6. Handbook

KROHNE OPTISWIRL 4200 Handbook

Vortex flowmeter
Hide thumbs Also See for OPTISWIRL 4200:
Table of Contents

Advertisement

Quick Links

OPTISWIRL 4200
OPTISWIRL 4200
OPTISWIRL 4200
OPTISWIRL 4200
Vortex flowmeter
© KROHNE 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en
Handbook
Handbook
Handbook
Handbook

Advertisement

Table of Contents
loading

Related Manuals for KROHNE OPTISWIRL 4200

Summary of Contents for KROHNE OPTISWIRL 4200

  • Page 1 OPTISWIRL 4200 OPTISWIRL 4200 OPTISWIRL 4200 OPTISWIRL 4200 Handbook Handbook Handbook Handbook Vortex flowmeter © KROHNE 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...
  • Page 2 All rights reserved. It is prohibited to reproduce this documentation, or any part thereof, without the prior written authorisation of KROHNE Messtechnik GmbH. Subject to change without notice. Copyright 2015 by KROHNE Messtechnik GmbH - Ludwig-Krohne-Str. 5 - 47058 Duisburg (Germany) www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...

  • Page 3: Table Of Contents

    3.8.3 Installing devices in flange design ..................31 3.8.4 Mounting the field housing, remote version ................ 32 3.9 Heat insulation........................ 33 3.10 Turning the connection housing................... 34 3.11 Turning the display ....................... 35 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...
  • Page 4 6.8.1 Settings for free air delivery measurement - FAD............... 81 6.8.2 Gross Heat Measurement..................... 82 6.8.3 Net Heat Measurement ......................83 6.9 Status messages and diagnostic information..............84 6.10 Plausibility Checks Menu A12 ..................89 www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...
  • Page 5 8.2 Technical data......................... 95 8.3 Dimensions and weights ....................100 8.3.1 Flange versions........................100 8.3.2 Sandwich version ........................ 107 8.3.3 Dimensions of remote version.................... 109 8.4 Flow tables ........................110 9 Notes 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...

  • Page 6: Safety Instructions

    ER 1.0.0_ MA OPTISWIRL 4200 R01 2015-01-07 ER 1.0.1_ 1;2-H MA OPTISWIRL 4200 R01 2015-02-04 ER 1.0.2_ 1;3-PO MA OPTISWIRL 4200 R01 2015-03-04 ER 1.0.3_ 1;2-H MA OPTISWIRL 4200 R01 www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...

  • Page 7: Intended Use

    Primarily, volumetric flow and temperature are measured, with pressure measurement as an option. From these parameters the measuring device calculates the mass flow or standard volumetric flow using pre-programmed density data and then exports the measured values via various communication interfaces. 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...
  • Page 8 2 Use the smaller value, according to the amount. INFORMATION! DN15C and DN25C have a robust flow sensor (signal pick-up) for harsh measuring conditions and higher maximum velocity compared to the standard version. www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...

  • Page 9: Certifications

    The manufacturer certifies successful testing of the product by applying the CE marking. DANGER! For devices used in hazardous areas, additional safety notes apply; please refer to the Ex documentation. 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...

  • Page 10: Safety Instructions From The Manufacturer

    The manufacturer reserves the right to alter the content of its documents, including this disclaimer in any way, at any time, for any reason, without prior notification, and will not be liable in any way for possible consequences of such changes. www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...

  • Page 11: Product Liability And Warranty

    This document is provided to help you establish operating conditions, which will permit safe and efficient use of this device. Special considerations and precautions are also described in the document, which appear in the form of icons as shown below. 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...

  • Page 12: Warnings And Symbols Used

    In general, devices from the manufacturer may only be installed, commissioned, operated and maintained by properly trained and authorized personnel. This document is provided to help you establish operating conditions, which will permit safe and efficient use of this device. www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...

  • Page 13: Device Description

    The following designs are available as options: • with pressure sensor - with or without shut-off valve • Flange version, measuring sensor with single reduction F1R • Flange version, measuring sensor with double reduction F2R 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...

  • Page 14: Devices With Connection Flange

    Figure 2-3: Sandwich versions with display 1 Version with temperature sensor 2 Version with temperature sensor and optional pressure sensor 3 Version with temperature sensor, optional pressure sensor and shut-off valve www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...

  • Page 15: Dual Version And Twofold Reliability

    With the remote version, the measuring sensor and signal converter are installed separately in different places. The 6-pin, shielded connection cable is available with a length up to 50 m / 164 ft. 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...

  • Page 16: Devices With Integrated Nominal Diameter Reduction

    1 Standard version 2.2.6 Device description Figure 2-5: Device description 1 Signal converter 2 Cable feed through 3 Pressure sensor, optional 4 Shut-off valve, optional 5 Measuring sensor 6 Centering ring www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...

  • Page 17: Free Air Delivery Measurement - Fad (Optional)

    FAD measurement is an optional feature which can be unlocked in menu item C6.3 "Extras". Please contact the manufacturer to obtain the four-digit code required to enable this feature. Programming example: refer to Settings for free air delivery measurement - FAD on page 81 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...

  • Page 18: Gross Heat Quantity Calculation (Optional)

    Gross heat quantity calculation is an optional feature, which can be unlocked in menu item C6.3 "Extras". Please contact the manufacturer to obtain the four-digit code required to enable this feature. Programming example: refer to Gross Heat Measurement on page 82 www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...

  • Page 19: Net Heat Quantity Calculation (Optional)

    Net heat quantity calculation is an optional feature which can be unlocked in menu item C6.3 "Extras". Please contact KROHNE to obtain the four-digit code required to enable this feature. Programming example: refer to Net Heat Measurement on page 83 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...

  • Page 20: Dual Seal

    Even though there is no reason to expect the seal to fail, regular visual checks should still be carried out to detect any possible leak as early as possible. In the event of a leak, contact the manufacturer's service department to service or replace the device. www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...

  • Page 21: Nameplate

    9 Tag no. - Measuring point identifier 10 Manufacturer's website Figure 2-9: Example of nameplate 1 Serial number 2 Order number 3 Production order number 4 Type code 5 Item number 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...

  • Page 22: Installation

    Non-secured devices can pose risk of injury. The centre of mass of the device is often higher than the point at which the lifting straps are attached. Prevent the measuring device from sliding or rotating accidentally. www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...

  • Page 23: Installation Conditions

    Suitable measures must be taken to avoid water cavitation if it is a possible risk. Sunshades Figure 3-2: Installation recommendations 1 Horizontal mounting 2 Vertical mounting The meter MUST be protected from strong sunlight. A sunshade is available from the manufacturer as an option. 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...

  • Page 24: Prohibited Installation When Measuring Liquids

    Figure 3-4: Downstream pipe and outlet CAUTION! Installing the device in a downstream pipe 3 or upstream pipe of an outlet 4. There is the risk of partially filled pipes leading to inaccurate measurements. www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...

  • Page 25: Prohibited Installation When Measuring Vapours And Gases

    1 Recommended: installing the device before the control valve at a distance of ≥ 5 DN 2 Not recommended: Installing the flowmeter directly downstream of control valves, due to vortex formation. 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...

  • Page 26: Preferred Mounting Position

    3 On a vertical pipe 4 Horizontal pipeline with signal converter-orientation 90° to the side INFORMATION! Depending on the installation position, you may have to rotate the display and/or the connection housing. www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...

  • Page 27: Minimum Inlet Sections

    The nominal diameter of the flange is significant for the determination of the minimum inlet and outlet sections for the nominal diameter reduced versions of Vortex flowmeter F1R and F2R. 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...

  • Page 28: Minimum Outlet Sections

    1 Straight inlet section upstream of straightener ≥ 2 DN 2 Flow straightener 3 Straight pipe run between flow straightener and device ≥ 8 DN 4 Minimum straight outlet section ≥ 5 DN www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...

  • Page 29: Installation

    Figure 3-11: Inner diameter 1 Inner diameter of connection pipe 2 Inner diameter of flange and gasket 3 Inner diameter of measuring sensor 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...

  • Page 30: Installing Devices In Sandwich Design

    • Turn the centring ring 2 in a counter-clockwise direction and align the device. • Check that the gaskets 5 are concentric; they must not protrude into the pipe cross-section. • Now tighten all nuts bit by bit alternately across the diagonal. www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...

  • Page 31: Installing Devices In Flange Design

    • Install the gasket, bolts and fastening nuts on the other side of the flange. • Align the measuring device and the gaskets so they are concentric. • Now tighten all nuts bit by bit alternately across the diagonal. 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...

  • Page 32: Mounting The Field Housing, Remote Version

    Converters with a wall mounting rack have to be mounted with screws (ø 8mm), or with U- brackets (ø 8mm) in case of pole installation. In case of mounting directly to the wall, a mounting system suitable for the background has to be applied. www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...

  • Page 33: Heat Insulation

    2 Max. thickness of the insulation up to the bend of the pressure pipe 3 Insulation CAUTION! The heat insulation 3 may only extend as far as the bend of the pressure sensing line 2. 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...

  • Page 34: Turning The Connection Housing

    • Loosen the M4 hexagon socket screw 1 on the side of the connection housing. • Rotate the connection housing to the desired position (0...<360°). • Tighten the hexagon socket screw 1 again. www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...

  • Page 35: Turning The Display

    • Turn the cover with gasket 5 back onto the housing and tighten it by hand. INFORMATION! Before closing the housing cover refer to Maintaining the O-Rings on page 91 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...

  • Page 36: Electrical Connections

    INFORMATION! Check the device nameplate to ensure that the device is delivered according to your order. Check for the correct supply voltage printed on the nameplate. www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...

  • Page 37: Connecting The Signal Converter

    • Turn the housing cover and gasket back onto the housing and tighten it by hand. INFORMATION! Ensure that the housing gasket is properly fitted, clean and undamaged. Before closing the housing cover refer to Maintaining the O-Rings on page 91 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...

  • Page 38: Electrical Connections

    Connect current loop 4..20mA to terminals C1+ and C2-. When connection cables are long, a shielded or twisted cable may be necessary. The cable shield may only be grounded at one place (e.g. on the power supply unit). www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...

  • Page 39: Current Input

    The binary output is electrically separated from the current output and must be supplied with power separately. 4.3.5 Limit switch output Figure 4-4: Connection binary output 1 Power supply U ext. 2 Isolated switching amplifier 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...
  • Page 40 The upper limit of the signal current must not be exceeded as this may damage the transistor output. For selection of measurement variable and adjustable data of the limit switch please refer to chapter 6.7.6 Menu Description C, menu item C2.2.5 Limit Switch and appropriate sub-menus. www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...

  • Page 41: Pulse Output / Frequency Output

    6.7.6 Menu Description C, menu item C2.2.2 Pulse Output or menu item C2.2.3 Frequency Output and appropriate sub-menus. INFORMATION! Make sure the pulse width is in line with the pulse rate. 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...

  • Page 42: Status Output

    4.4 Connection of remote version The connections in the sensor and wall mount bracket connection boxes are identical in construction. Connection cable strand colour Terminals Strand colour blue black grey yellow green gnye Shielding www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...
  • Page 43 CAUTION! Please ensure that the shielding 4 has been properly connected to both terminals 3 and 5. The exterior shielding of the cable must not be connected to any terminal. 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...

  • Page 44: Grounding Connections

    1 Electrical grounding connection on measuring sensor 2 Electrical grounding connection on signal converter housing INFORMATION! In the remote version, the sensor as well as the signal converter must be grounded. www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...

  • Page 45: Ingress Protection

    • Align the measuring device so that the cable feedthrough is never facing up 3. • Close any unused cable feedthroughs using blind plugs 4 suitable for the protection category. • Do not remove the required cable bushing from the cable feedthrough. 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...

  • Page 46: Start-Up

    5.2 Operation INFORMATION! The measuring device is largely maintenance-free. Observe the application limits in respect of temperature and medium. www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...

  • Page 47: Operation

    4 1st measured variable in large representation 5 Indicates when a key has been pressed 6 Tag number (just shown if entered previously by the operator) 7 Indicates a possible status message in the status list 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...

  • Page 48: Display For Selection Of Submenu And Functions, 3 Lines

    (_ _ _ signalise in this line the end of the list) 6 Current menu(s), submenu or function 7 Previous menu(s), submenu or function (_ _ _ signalise in this line the beginning of the list) www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...

  • Page 49: Display When Setting Parameters, 4 Lines

    3 Denotes a changed parameter (simple check of changed data when browsing through lists) 4 Next parameter 5 Currently set data from 6 6 Current parameter (for selection press key >; then see previous chapter) 7 Factory setting of parameter 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...

  • Page 50: Basic Principles Of Operation

    • Press the ^ button to save the settings, or to reject them. • Before returning to measuring mode, you are prompted "Save config? Yes". Switch between "Yes", "Back" and "No" by pressing the ↑ or ↓ keys. www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...

  • Page 51: Character Selection In Change Mode

    Volume Flow 6.2.4 Character selection in change mode Depending on the menu function, the following characters are available: Numbers Lower case letters Upper case letters Special characters ..08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...

  • Page 52: Units, Figures And Factors

    Access Levels Access Levels Access Levels The OPTISWIRL 4200 features a multi-level security concept, which helps to prevent accidental or unauthorized configuration changes. To gain a specific access level you need to log into the device by entering a four-digit hexadecimal password associated with that access level (see menu C6.2 “Security”).
  • Page 53 “Reset Passwords” command available in the C6.2.3 submenu. However to prevent unauthorized use this command itself is protected by a non-changeable unique password available by contacting KROHNE. 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...

  • Page 54: Overview Of The Most Important Functions And Units

    Francais in preparation: Italiano Portugues Nederlands Espanol Svensk Russian Norwegian Finnish Slovenian Czech Hungarian Slovak Albanian Bulgarian Romanian Moldavian Danish Polish Lithuanian Chinese Estonian Latvian Turkish Table 6-4: Menu languages www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...

  • Page 55: Gas Options For Gas Measurement

    ↑. Change between the digits by pressing the rightwards button →. After reaching the last digit the cursor will jump again to the first digit. 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...

  • Page 56: Units

    Units for standard volume flow Units for standard volume flow Units for standard volume flow Liquids, vapours, gases /min Customised standard volume flow Table 6-6: Flow measurements and their units www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...
  • Page 57 Mcal g/ml kg/cm temperature Mcal/h lb/gal g/cm torr Btu/h Customised lb/ft energy Mbtu/s lb/in psi (abs) Mbtu/h Customised density Mbtu/d b/ft Customised power Customised pressure Table 6-9: Units additional measurements 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...

  • Page 58: Menu Structure

    A9.21 Density A9.22 Cst. Density A10 Meter Type A11 Application A11.1 Liquids assistant A11.2 Saturated Steam A11.3 Superheated Steam A11.4 Heat Measurement A11.5 Gas A11.6 FAD A12 Cluster Cluster 1...12 Checks www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...

  • Page 59: Menu Overview B - Test

    B2.4 Mass Flow B2.5 Gross Power B2.6 Net Power B2.7 FAD B2.8 Volume B2.9 Norm. Volume B2.10 Mass B2.11 Gross Energy B2.12 Net Energy B2.13 Density B2.14 Temperature1 B2.15 Temperature2 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...

  • Page 60: Menu Overview C - Setup

    C1.6.1 Temp. Source1 C1.6.2 Temp. Source2 C1.7 Pressure Sensor C1.8 Time Constant C1.9 Low Flow Cutoff C1.10 Operating C1.10.1 Oper. Temperature Values C1.10.2 Oper. Pressure C1.10.3 Oper. Density C1.10.4 Min/Max Oper. Dens. www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...
  • Page 61 C4.1.4 Set Value C4.1.5 Start Totalizer? C4.1.6 Stop Totalizer? C4.1.7 Information C4.2 Energy C4.2.1 Measurement C4.2.2 Preset Value C4.2.3 Reset Totalizer? C4.2.4 Set Value C4.2.5 Start Totalizer? C4.2.6 Stop Totalizer? C4.2.7 Information 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...
  • Page 62 C6.1.9 Device Revision C6.1.10 Software Revision C6.1.11 Hardware Revision C6.1.12 Electronic Serial No. C6.1.13 CG-Number C6.1.14 Production Date C6.1.15 Calibration Date C6.2 Security C6.2.1 Login C6.2.2 Change Password C6.2.3 Reset Passwords www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...
  • Page 63 C6.6 Factory Default C6.6.1 Reset to Fact. Def.? 1 All even-numbered menu items e.g. C6.5.2 are appropriate customised units. It is followed by submenu items with prompts for text, offset and factor. 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...

  • Page 64: Menu Description A - Quick Setup

    FAD functionality Application Assistant Details see next tables Plausibility Checks Menu A12 Cluster Checks refer to on page 89 www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...
  • Page 65 OPTISWIRL 4200 A11 Application Assistant The factory settings of your OPTISWIRL 4200 have been made in accordance with your order specifications. Nonetheless it can be necessary to make additional settings for the use of some functionalities. For an easy operation the device is equipped with an application assistant for each type of application.
  • Page 66 One Value / Two Values / Three Values / One Value & Bargraph / Two values & Bargraph 2. Meas. Page One Value / Two Values / Three Values / One Value & Bargraph / Two values & Bargraph www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...
  • Page 67 Flow Totalizer Same options as in A11.1.11 Energy Totalizer Same options as in A11.1.12 1. Meas. Page Same options as in A11.1.13 2. Meas. Page Same options as in A11.1.14 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...
  • Page 68 Flow Totalizer Same options as in A11.1.11 Energy Totalizer Same options as in A11.1.12 1. Meas. Page Same options as in A11.1.13 2. Meas. Page Same options as in A11.1.14 www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...
  • Page 69 Same options as in A11.1.8 Status Output Same options as in A11.1.9 Limit Switch Same options as in A11.1.10 Flow Totalizer Same options as in A11.1.11 Energy Totalizer Same options as in A11.1.12 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...
  • Page 70 Same options as in A11.1.6 Pulse Output Same options as in A11.1.7 Frequency Output Same options as in A11.1.8 Status Output Same options as in A11.1.9 Limit Switch Same options as in A11.1.10 www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...
  • Page 71 Same options as in A11.1.6 Pulse Output Same options as in A11.1.7 Frequency Output Same options as in A11.1.8 Status Output Same options as in A11.1.9 Limit Switch Same options as in A11.1.10 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...

  • Page 72: Menu Description B - Test

    Enter gas mixture as percentage share of gas options refer to Gas options for gas measurement on page 55 C1.3.2 Relative Humidity This menu item is available if fluid = Wet Gas. Enter 0…100% www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...
  • Page 73 C1.10.4.1 Function Select: On / Off If function = On, min./max. operating density can be defined in C1.10.4.2 and C1.10.4.3 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...
  • Page 74 Enter measured value for 20 mA point. Reset to 20 mA restores the factory calibration. Binary output C2.2 Binary Output For possible functions of the binary output refer to on page 39 www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...
  • Page 75 Value defines the sensitivity of transition detection. Enter value between -1.0 (to decrease sensitivity) and +1.0 (to increase sensitivity). C2.2.5 Limit Switch Only available, if Limit Switch is selected in C2.2.1 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...
  • Page 76 Primary HART variable; identical with current output measurement variable C3.1.4.2 Frequency Out. Meas. Secondary HART variable; identical with frequency output measurement variable C3.1.4.3 Current Input Meas. Tertiary HART variable; identical with current input measurement variable www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...
  • Page 77 Enter current value in selected unit. Start value has to be confirmed with 'Yes' or refused with 'No'. C4.2.5 Start Totalizer? Select: Yes / No C4.2.6 Stop Totalizer? Select: Yes / No 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...
  • Page 78 Display of meter type as activated in A10 or C6.3.2 - C6.3.4. (read-only) C6.1.4 Serial number Individual device ID (read-only) C6.1.5 Manufacturer ID HART Manufacturer ID = 00069 [KROHNE] (read-only) www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...
  • Page 79 Heat & Dens. & FAD C6.4 Errors C6.4.1 Message View Display of NAMUR messages F S M C I Status messages and diagnostic information Explanations: refer to on page 84 C6.5 Units 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...
  • Page 80 Press → and confirm reset to factory default with `Yes' or refuse with 'No'. 1 In all even numbered menu items C6.5.2 to .22 Cst. Units (Custom Units) there is a sub menu with the prompt for "Text", "Offset" and "Factor". www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...

  • Page 81: Setting Examples

    C5.3.3 / 4 0% / 100% Range Enter bargraph range limits (0% / 100%) in selected unit INFORMATION! This is an example setup for basic FAD measurement. Other setup options are feasible. 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...

  • Page 82: Gross Heat Measurement

    Two Values C5.3.2 Measurement 1. Line Gross Power C5.3.6 Measurement 2. Line Gross Energy INFORMATION! This is an example setup for basic gross heat measurement. Other setup options are feasible. www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...

  • Page 83: Net Heat Measurement

    Two Values C5.3.2 Measurement 1. Net Power Line C5.3.6 Measurement 2. Net Energy Line INFORMATION! This is an example setup for basic net heat measurement. Other setup options are feasible. 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...

  • Page 84: Status Messages And Diagnostic Information

    Check the connection of the available or invalid pressure sensor. Perform a communication hard reset. If the message recurs, contact KROHNE. Corrupt Sensor Sensor parameters are Check sensor parameters. inconsistent www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...
  • Page 85 Perform a hard reset. If the parameter memory message recurs, contact KROHNE. Disp. NVRAM Layout Error Incompatible data after Perform a hard reset. If the firmware update message recurs, contact KROHNE. 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...
  • Page 86 Make sure that the device is pressure sensor out of operated within the specification permissable temperature range. Elec. Temp. Out Of Spec. The electronic temperature of the sensor module is out of specification. www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...
  • Page 87 (maintenance the SIL mode according to mode 2) has to be performed the instructions of the safety by the operator. manual and confirm the correctness with the SIL jumper. 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...
  • Page 88 Failed Piezo Test The continuous self test of Perform a hard reset. If the the sensor electronic failed. message recurs, contact Failed Sensor Input Test KROHNE. Failed Sensor MCU Test www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...

  • Page 89: Plausibility Checks Menu A12

    100%. HART Catch If temperature or pressure data input is provided by HART, the device checks if the "Slot Variable Number“ fits in with the "Capture Command“. (Temperature / Pressure) 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...

  • Page 90: Service

    • Tighten the two screws 6. • Attach the measuring sensor cable 5 • Attach display 1 in desired position, apply even pressure to the entire surface. • Screw on cover by hand. www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...

  • Page 91: Maintaining The O-Rings

    Operational temperature range (-30 C ...130 C at permanent lubrication) • ° ° Free from silicone • Good adhesive capability • • Lithium saponified Water resistant • Compatible with material of O-ring • 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...

  • Page 92: Spare Parts Availability

    • such dangerous substances, to enclose a certificate with the device confirming that is safe to handle and stating the • product used. www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...

  • Page 93: Form (For Copying) To Accompany A Returned Device

    The user must dispose of the WEEE to a designated collection point for the recycling of WEEE or send them back to our local organisation or authorised representative. 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...

  • Page 94: Technical Data

    : S . v The vortex frequency is recorded at the sensor and evaluated at the converter. Figure 8-1: Functional principle www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...

  • Page 95: Technical Data

    Flange version with double reduction of nominal diameter, measuring sensor: F2R Display and user interface Local display Graphic display Interface and display languages German, English, French, 23 further languages in preparation 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...
  • Page 96 Gases and vapours 2.0…80 m/s / 6.6…262.5 ft/s DN15: 3.0…45 m/s / 9.8…148 ft/s; DN25: 2.0…70 m/s / 6.6…230 ft/s Intended use For further information refer to on page 7. www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...
  • Page 97 All inputs and outputs are electrically isolated from one another. Time constant The time constant corresponds to 63% of the elapsed time of a processor procedure. 0...100 s (rounded up to 0.1 s) 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...
  • Page 98 VDI/VDE 2188 (category 2) Temperature coefficient 50 ppm/K Residual current < 0.2 mA at 32 V (Ri = 180 kOhm) Pulse width 0.5...2000 ms www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...

  • Page 99: Pulse Output

    QPS IS Class I Div 1 - in preparation QPS XP Class I Div 1 - in preparation QPS NI Class I Div 2 - in preparation QPS DIP Class II, III Div 1 - in preparation 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...

  • Page 100: Dimensions And Weights

    380.3 380.3 368.3 169.3 169.5 169.5 396.8 380.3 380.3 171.5 169.3 169.5 396.8 380.3 380.3 171.5 169.3 169.5 396.8 396.8 380.3 171.5 169.3 169.5 396.8 396.8 380.3 171.5 169.3 169.5 www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...
  • Page 101 492.8 468.8 468.8 229.5 202.8 492.8 468.8 468.8 229.5 202.8 492.8 492.8 468.8 229.5 202.8 492.8 492.8 468.8 229.5 202.8 1 F1R - single reduction 2 F2R - double reduction 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...
  • Page 102 128.1 127.5 132.0 131.4 143.2 142.6 Weight specifications for version with two signal converters + 3.2 kg / 7.05 lb 1 F1R - single reduction 2 F2R - double reduction www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...
  • Page 103 396.8 380.3 368.3 171.5 169.3 169.5 396.8 380.3 368.3 171.5 169.3 169.5 416.3 396.8 380.3 191.5 171.1 169.3 416.3 396.8 380.3 191.5 171.1 169.3 416.3 396.8 380.3 191.5 171.1 169.3 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...
  • Page 104 75.4 74.8 72.2 71.6 78.1 77.5 75.0 74.4 75.2 74.6 73.9 73.3 107.0 106.4 112.4 111.8 113.5 112.9 107.0 106.4 109.8 109.2 120.4 119.8 152.0 151.4 165.4 155.8 171.7 171.1 www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...
  • Page 105 15.7 15.0 14.5 6.76 6.67 6.67 15.7 15.0 14.5 6.76 6.67 6.67 16.4 15.6 15.0 7.54 6.76 6.67 16.4 15.6 15.0 7.54 6.76 6.67 16.4 15.6 15.0 7.54 6.76 6.67 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...
  • Page 106 166.3 165.0 159.2 157.9 172.2 171.0 165.4 164.1 165.9 164.5 163.0 161.7 236.0 234.7 247.9 246.6 250.3 249.0 236.0 234.7 242.2 240.8 265.5 264.2 335.2 333.9 364.8 343.6 378.7 377.4 www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...

  • Page 107: Sandwich Version

    Specified weight + 2.8 kg / 6.2 lb Sandwich version EN Nominal size Pressure Dimensions [mm] Weight [kg] rating with without Pressure sensor 174.25 174.25 174.5 174.5 174.25 176.5 10.1 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...
  • Page 108 19.4 18.08 2.91 5.31 2.56 11.42 6.82 19.4 18.08 3.82 6.22 2.56 12.21 6.95 22.27 20.94 3.82 6.22 2.56 12.21 6.95 22.27 20.94 3.82 6.22 2.56 12.21 6.95 22.27 20.94 www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...

  • Page 109: Dimensions Of Remote Version

    1 F1R - single reduction - 2 F2R - double reduction Dimensions b...n b...n b...n b...n [mm] ["] 5.46 4.25 10.9 7.53 4.14 3.82 2.84 4.25 0.35 2.84 3.82 8.90 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...

  • Page 110: Flow Tables

    1086 14478 286870 3824929 1577 21028 416638 5555167 Values based on air at 20°C / 68°F and 1.013 bar abs / 14.696 psig and density 1.204 kg/m / 0.0751 lb/ft www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...
  • Page 111 1093 31715 1210 35334 1288 37737 1808 52054 2053 59574 2273 66371 2419 70884 2890 83215 3282 95237 3634 106102 3867 113318 4197 120858 4767 138318 5279 154099 5617 164578 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...
  • Page 112 2424 70309 2687 78419 2799 82006 4011 115455 4553 132068 5048 147302 5258 154041 6412 184569 7279 211127 8069 235481 8406 246254 9313 268060 10571 306632 11720 342002 12209 357649 www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...

  • Page 113: Notes

    NOTES OPTISWIRL 4200 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...
  • Page 114 NOTES OPTISWIRL 4200 www.krohne.com 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en...
  • Page 115 NOTES OPTISWIRL 4200 08/2015 - 4003930801 - MA OPTISWIRL 4200 R01 en www.krohne.com...
  • Page 116 • Process Analysis • Services Head Office KROHNE Messtechnik GmbH Ludwig-Krohne-Str. 5 47058 Duisburg (Germany) Tel.: +49 203 301 0 Fax: +49 203 301 10389 info@krohne.com The current list of all KROHNE contacts and addresses can be found at: www.krohne.com...

Table of Contents