KROHNE IFC 020 K Installation And Operating Instructions Manual page 3

5.15 Applications
5.16 Setting data
5.17 Communication interface
5.18 Control input E (IFC 020 E only)
Part C Special applications, functional checks, service, and order numbers
6 Special applications
6.1 HART interface
6.2 KROHNE RS 485 interface
6.3 Stable signal outputs when measuring tube empty
6.4 Pulsating flow
6.5 Rapid changes in flowrate
6.6 Unsteady display and outputs
7 Functional checks
7.1 Zero check, Fct. 3.03
7.2 Test of measuring range Q, Fct. 2.01
7.3 Hardware information and error status, Fct. 2.02
7.4 Faults and symptoms during start-up and process flow measurement
7.5 Test of signal converter using GS 8A simulator (option)
8 Service
8.1 Illustrations used for service work
8.2 Replacement of power fuses
8.3 Changeover of operating voltage on AC Versions 1 and 2
8.4 Replacement of electronics unit of signal converter
8.5 Cleaning the signal converter housing
8.6 Turning the converter housing of the compact flowmeters
8.7 IFC 020 K and F: Directions for folding the ribbon cable on the display unit
8.8 IFC 020 K and F: Illustrations of the PCBs
8.9 IFC 020 E: Illustrations of the PCBs
9 Order numbers
Part D Technical data, measuring principle and block diagram
10 Technical data
10.1 Full-scale range Q
10.2 Error limits at reference conditions
10.3 IFC 020 signal converter
10.4 Dimensions and weights
10.5 Instrument name plates
11 Measuring principle
12 Block diagram - signal converter
Part E Index
Printed form to accompany flowmeters returned to Krohne
100%
Installation and operating instructions IFC 020
5/12
5/12
5/12
5/12
6/1-9/1
6/1-6/6
6/1-6/2
6/2
6/3-6/4
6/5
6/5
6/6
7/1-7/8
7/1
7/1
7/2
7/2-7/4
7/5-7/8
8/1-8/9
8/1-8/2
8/3
8/4
8/5
8/5
8/6
8/7
8/8
8/9
9/1
10/1-12/1
10/1-10/7
10/1
10/2
10/3-10/4
10/5-10/6
10/7
11/1
12/1
E1-E2
E3
0/2