Table of Contents
Advertisement
→ VALUE P = set pulse value per unit volume
(appears only when "PULSE/VOL." set under "SELECT P", press → key.
•
XXXX PulS/m3
•
XXXX PulS/Liter
•
XXXX PulS/US.Gal
•
XXXX PulS/ user unit, factory-set: "Liter" or "US MGal", see Sect. 5.12.
Select using ↑ or ↓ key.
Transfer to number setting with → key. 1st digit (cursor) flashes.
Set numerical value
•
XXXX
(setting range depends on pulse width and
full-scale range: P
Change flashing digit (cursor) with ↑ or ↓ key,
shift cursor 1 place to right with → key.
Press ↵ key to return to Fct. 1.06 PULS. P.
→ VALUE P = set pulse value per unit time,
(appears only when "PULSE/TIME" has been set under "SELECT P"), press → key.
•
XXXX PulSe/Sec
•
XXXX PulSe/min
•
XXXX PulSe/hr
•
XXXX PulSe/ user unit, factory-set: "hr", see Sect. 5.12.
Select using ↑ or ↓ key.
Transfer to number setting with → key, 1st digit (cursor) flashes.
Set numerical value
•
XXXX
(setting range depends on pulse width)
Change flashing digit (cursor) with ↑ or ↓ key,
shift cursor 1 place to right with → key.
Press ↵ key to return to Fct. 1.06 PULS. P.
Refer to Sect. 2.4 for connection diagrams, and to Sect. 5.14 for characteristics.
= F
min
Please refer to Sect. 3.2 "factory settings"
Installation and operating instructions IFC 020
/ Q
P
= F
min
100%
max
or
/ Q
)
max
100%
5/6
Hide quick links:
Advertisement
Table of Contents
