Table of Contents
Advertisement
5: Configuring the PinPoint X
•
ACEmanager
•
Using a Terminal
Application with
AT Commands
•
AT Command
Rev 2.0 Mar.10
With ALEOS as its "brain", the PinPoint X is a highly configurable
device.
To configure your PinPoint X, you have two options. You can use the
configuration and management applications of the AceWare suite or
you can use a terminal emulator application such as HyperTerminal,
PuTTY, or many others.
ACEmanager
To get a more expanded view of the other ACEmanager features,
refer to the ACEmanager Guide.
A full listing of all the configuration commands for you modem are in
Appendix
A.
Using a Terminal Application with
AT Commands
You can access and configure your PinPoint X using a terminal
application such as Microsoft HyperTerminal, PuTTY, or similar. The
following directions are for HyperTerminal which is part of a standard
installation of Windows XP.
1. Choose a name and icon for your connection
a. Choose a name for your connection, such as PinPoint X or
Sierra Wireless AirLink Solutions. The name and icon are
only for your own reference so you can find the connection at
a later date.
Tip:
If you want to have a connection saved for both local and remote, it is
recommended the connection name reflect the connection type, i.e. PinPoint
X local.
b. Select OK.
c.
2. Connect to
Using USB/Serial:
a. Select COM1, or the comport to which the modem is
connected, for the "Connect Using".
5
35
Advertisement
Table of Contents
