Sierra Wireless AirLink PinPoint X User Manual page 35

PinPoint X 1x/EV-DO
24
If you already have other modems installed on your computer, they will be listed
on the Sierra Wireless AirLink Modem Installation screen. If you have other
modems installed on your computer using the same serial port, they may conflict.
As long as you do not intend to use them, you can Remove other modems using
this menu.
Figure 3-14: Setup Wizard : DUN driver
a. Select Install to begin adding the driver for the PinPoint X to your
computer.
Figure 3-15: Setup Wizard : DUN settings
b. The COM port and speed should match the settings of the PinPoint X and
where it will be connected (default settings will be pre-entered).
c. Select Next to begin the driver installation.
d. You will see a confirmation box from Microsoft Windows to specify if you
wish to install this driver on your computer. Select Continue Anyway to
install the driver.
e. When the driver is installed, you will return to the Modem installation
screen. The PinPoint X should now be listed (in addition to any other
modem installed on your computer).
f. Click Next to continue to install the DUN configuration.
20070914