Rev 2.0 Mar.10
•
Optional parameters are denoted with square brackets [ ].
•
AT Commands are not case sensitive. A capital "E" is the same as a lower-
case "e".
•
When you are using a terminal connection, if you enter a command which is
recognized by the PinPoint X, it will respond with "OK". If the command is not
recognized, the response will be "ERROR".
•
Those commands applicable only to certain model numbers of the PinPoint X
will be noted.
Caution:
Symbols listed with commands, such as *, /, &, or ?, are part of the command
and must be included. Commands with symbols other than * may require PassThru mode.
Configuring the PinPoint X
39