Table of Contents
Advertisement
PinPoint X 1x/EV-DO
18
After the Setup Wizard connects to your PinPoint X, the details for your specific
model will be displayed. If the incorrect model is displayed, press the Reset
Button on your PinPoint X so the Wizard can attempt to connect again. Click
Next.
After the Wizard detects your PinPoint X, you will be offered a menu of Setup
tasks. Choose the tasks you need from those displayed.
Figure 3-5: Setup Wizard : Task Menu
•
Update ALEOS Firmware: Check the Sierra Wireless server for the latest
ALEOS firmware.
•
Activate Modem: Configure your PinPoint X to connect on
the Verizon network.
•
Test Modem Setup: Verify your PinPoint X is properly configured and
connecting on the Verizon network.
•
Setup a DUN Connection: Create a Dial-Up Networking entry for local
connection. This part of the setup is only needed if you will be using your
PinPoint X to connect directly from a computer to the Internet or other
network.
Click Next when you have selected your desired options.
Note: Based on your selections, you may not need to do all of the following Wizard steps.
20070914
Advertisement
Table of Contents
