Table of Contents
Advertisement
PinPoint X 1x/EV-DO
36
Figure 5-1: Connect To
b. Change or verify the settings:
· Bits per Second: 115200 (default)
· Data Bits: 8
· Parity: None
· Stop Bits: 1
· Flow Control: Hardware.
Figure 5-2: Port Settings
If you have configured the PinPoint X for settings different than the defaults for Bits
Tip:
per Second, Data Bits, Parity, and/or Stop Bits, you will need to use your changed settings.
c. Select OK.
Using Ethernet:
d. Select TCP/IP (Winsock) for "Connect Using".
e. Type in 192.169.14.31 for Host Address.
f.
Change the "Port Number" to 2332.
20070914
Advertisement
Table of Contents
