Table of Contents
Advertisement
Activating your PinPoint X on Verizon
Figure 3-2: Setup Wizard : Ethernet Connection/USB Connection
Figure 3-3: Ethernet Port
Tip:
If the Setup Wizard is unable to detect the PinPoint X, check the green link LED on
the Ethernet port of the modem to see if it is lit to indicate an Ethernet connection with your
computer. If you do not see this light or if your computer shows a "Network Cable
Unplugged" message or icon, try a different Ethernet cable.
OR
If you connected your PinPoint X to the serial port on your computer, select
Connected to a Serial Port, check Auto Detect Port Settings or select the port
from the drop down menu. Click Next.
Figure 3-4: Setup Wizard : Serial Connection
Note: You cannot activate with serial and would need USB/net to use set up wizard.
Rev 2.0 Mar.10
17
Advertisement
Table of Contents
