Setup Wizard - Sierra Wireless AirLink PinPoint X User Manual

PinPoint X 1x/EV-DO
Note: The Setup Wizard
requires the Microsoft
.NET framework v. 1.1 and
Microsoft Windows 98,
Windows 2000, Windows
XP, or later. You can obtain
.NET from Microsoft: http://
www.microsoft.com.
16

Setup Wizard

You can find the Setup Wizard installation on the CD which came with your
PinPoint X or on the Sierra Wireless website: http://www.sierrawireless.com/
support/AirLink/default.aspx.Use only the Setup Wizard for Verizon for best
results.
1. Wizard: Starting the Setup Wizard
a. Connect the PinPoint X to your computer using an Ethernet cable or a
serial cable USB cable.
b. Connect the power adapter and antenna to your PinPoint X.
c. Install the Setup Wizard by running VerizonSetupWizard.exe and follow
the prompts.
d. Run the Setup Wizard from the Windows Start menu.
Start>All Programs>AirLink Communications>Setup Wizard>Setup Wizard
Figure 3-1: Setup Wizard
e. Click Next to start the Wizard process.
If you connected your PinPoint X to the port on your computer, select Connected
to an Ethernet/USB Port and use the drop down menu to select the Ethernet
adapter or USB/net connectionon your computer to which the modem is
connected (most computers only have one adapter which will be selected for
you). The default password for the modem is entered for you. Click Next.
Note: If you want to use USB with the Setup Wizard you will need to first install the driver,
refer to Installing the USB driver section in this Chapter.
20070914