Configuring With Acemanager - Sierra Wireless AirLink ES440 Hardware User's Manual

Rev 1 Oct.13
Power-up and Reboot
On power-up or reboot, the LEDs go through a booting sequence. When the boot
is complete, the Power and Network LEDs should be green, signifying that the
power is on, the ES440 is connected to the wireless network, and there is a good
signal. See Table 2-2 for detailed LED operation.
To reboot the ES440:
• In ACEmanager, click the Reboot button at the top right of the screen.
Or
• Press and release the Reset button on the ES440 (see
page 9).

Configuring with ACEmanager

The ES440 is highly configurable using ACEmanager, a free ALEOS utility. For all
of the configurable features available in ALEOS, see the ALEOS Software
Configuration User Guide. It is available for downloading from the Sierra Wireless
support web site.
If the ES440 is not connected to the Mobile Network Operator:
1. In ACEmanager, check the Network State on Home page. It should say
"Network Ready". If it says No SIM or Unexpected SIM, check that the correct
SIM card is inserted. (See
2. Also check the Signal Strength. It should be greater than -100.
Figure 2-5: ACEmanager: Home
3. Check the APN on the WAN/Cellular tab.
Startup and Configuration
Installing the SIM Card
Front Panel on
on page 15.
23