Table of Contents
Advertisement
Reset to Factory Settings
3.
While holding the reset button, reconnect the Communicator to power.
Figure 47. Hold Reset button and reconnect power
4.
Release the reset button.
The Communicator enters exception state.
5.
Reboot the Communicator.
Result
When the Communicator has successfully rebooted, the Communicator configuration is reset to the factory
default configuration or the current configuration after firmware upgrade.
To Do Next
To ensure that the Communicator built-in web-interface is synchronized.
1.
Open the the Communicator built-in web interface.
2.
Navigate to the Files & firmware page and click Revert.
Figure 48. Files & firmware, Revert
SCM-1202-202 Version 1.0
®
™
Anybus
Communicator
- PROFINET Device to PROFIBUS Device
Page 53 of 60
- Quick Links:
- I/O Configuration
Hide quick links:
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for HMS Networks Anybus Communicator ABC4023
Related Products for HMS Networks Anybus Communicator ABC4023
- HMS Networks Anybus Wireless Bolt LTE
- HMS Networks AWB1500
- HMS Networks AWB1501
- HMS Networks Anybus Wireless Bridge II CAN
- HMS Networks Anybus Wireless Bolt II
- HMS Networks Anybus Wireless Bridge II CAN AWB3006
- HMS Networks Anybus Wireless Bridge II Serial AWB3015-B
- HMS Networks Anybus Wireless Bolt Serial AWB2010-B
Need help?
Do you have a question about the Anybus Communicator ABC4023 and is the answer not in the manual?
Questions and answers