Storing Data To A File; Figure D-16. Downloaded Input Data - Thermo Scientific Partisol 2025i Instruction Manual

Communications Using iPort or RPComm
Using RPComm

Storing Data to a File

D-16 Partisol 2025i and Partisol 2025i-D Instruction Manual
Figure D–16. Downloaded Input Data
Use the following procedure to save data to a file.
1. From the RPComm Main screen
Interval Data or Input Data tab
D–16).
2. Select the Save icon. The Save Dialog box will appear and prompt the
user for a file name. The default file name is:
nnnnnxyy.txt
where:
nnnnnn = the unit's serial number
x = data type (f = filter, i = interval, p = input)
yy = file number (01, 02, etc.)
3. Once you have chosen a file name, select the "Save" button If more
than one type of data has been downloaded, the Save Dialog box will
appear again prompting the user for a file name for the next type of
data. This will continue until all downloaded data have been saved.
(Figure D–9), select the Filter Data,
(Figure D–14, Figure D–15 or Figure
Thermo Fisher Scientific