Cleaning the system
Scienlab Regenerative AC Emulator – SL1200A Series – Operating Instructions
9 If defects were found during inspection, contact the KeysightCare; check
the display elements after completing the correction of defects.
Only use a dry, clean and lint-free cleaning cloth to clean the surface of the
system. Do not use any abrasive or flammable cleaning agents.
Cleaning must be carried out in consideration of the above-mentioned safety
notes as follows:
1 Switch off system by using the main switch 0 (OFF),
2 Disconnect system from mains supply and communication,
3 Measure the voltage at the output and terminals to ensure that they are
de-energized,
4 Wipe the housing, display modules and front panels with a dry, clean and
lint-free cleaning cloth.
Upkeep and Inspection
7
49/51