Control Box; Hand Control; M5 × 20 Mm Screw; M4 × 22 Mm Screw - SitOnit Seating Switchback Table Assembly Instructions Manual

SWITCHBACK 2-LEG 2-STAGE ASSEMBLY INSTRUCTIONS
8 C-LEG
M4 × 22 mm Screw

Hand Control

9 C-LEG
M5 × 20 mm Screw
Tabletop
STEPS
8. Place the control box and hand control in position as shown. For T-leg models, control box should be placed on
side closest to hand control. For C-leg models, control box should be placed on side farthest from hand control.
Attach hand control to tabletop with the two M4 × 22 mm screws provided. Attach the control box to tabletop
with the two M5 × 20 mm screws provided. Tighten using a #2 Phillips screwdriver.
9. Attach the frame assembly onto the underside of the tabletop using M5 × 20 mm screws provided (see
attachment hardware table) using a #2 Phillips screwdriver.
M5 × 20 mm Screw

Control Box

C-Leg Base Attachment Hardware
24" Depth 30" Depth
11 Screws 17 Screws
Frame Assembly
To report any issues with this product, please contact our customer service department at (888) 274-8664.
For more information, visit www.sitonit.net
T-LEG
M4 × 22 mm Screw
Hand Control
T-LEG
M5 × 20 mm Screw
Tabletop
M5 × 20 mm Screw
Control Box
T-Leg Base Attachment Hardware
24" Depth 30" Depth
9 Screws 9 Screws
Frame Assembly
8