SitOnit Seating Switchback Table Assembly Instructions Manual page 15

SWITCHBACK 2-LEG 2-STAGE USER GUIDE
ERROR CODES AND POWER SAVING
The digital display shows the error code below to suggest the issues that users may encounter during the
operation.
Error Code
000
E00
E01
E02
E03
E04
E11
E12
E13
E21
E22
E23
E31
E32
E33
POWER SAVING FUNCTION
To wake up the control:
• When no button has been pressed for 25 seconds, display goes off. Press any button to light up the display again.
• When no button has been pressed for 30 seconds, the system goes to <0.1W standby mode. Long press any button to
wake the system up. The digital display will show desk height again.
Description
Resetting
Not reset completely
Overuse protection
Unbalance protection
Anti-collision
T-touch protection
M1 Motor over-current protection
M2 Motor over-current protection
M3 Motor over-current protection
No hall sensor from M1
No hall sensor from M2
No hall sensor from M3
No current from M1
No current from M2
No current from M3
To report any issues with this product, please contact our customer service department at (888) 274-8664.
For more information, visit www.sitonit.net
15 15