SitOnit Seating Switchback Table Assembly Instructions Manual page 14

SWITCHBACK 2-LEG 2-STAGE USER GUIDE
HEIGHT ADJUSTMENT GUIDE
SETTING THE UPPER AND LOWER HEIGHT LIMITS
Setting upper height limit:
1. Adjust the desk to the preferred height of upper limit.
2. Press or buttons together and then release
3. Re-press more than 3 times in a slow pace.
4. A beeping sound will notify you that the process has completed.
Disable upper height limit:
1. Move the desk to the upper limit height being set.
2. Repeat steps 2–4 above to disable the upper limit settings.
Setting lower height limit:
1. Adjust the desk to the preferred lower limit height.
2. Press or buttons together and then release
3. Re-press more than three times in a slow pace.
4. A beeping sound will notify you that the process has completed.
Disable lower height limit:
1. Move the desk to the lower limit height being set.
2. Repeat steps 2–4 above to disable the lower limit settings.
PRESETTING THE DESK STARTING HEIGHT
This setting can be used to reset the displayed table height if required. This setting may be helpful if the table base is above or
below floor level.
1. Press button until the desk reaches its lowest position and then release
2. Re-press button again for five seconds and the digital display will start to flash.
3. Adjust the starting height with the
4. After 10 seconds, the display will stop flashing and this will confirm that you have successfully set the starting height.
or button and release the button when the preferred starting height is reached.
To report any issues with this product, please contact our customer service department at (888) 274-8664.
For more information, visit www.sitonit.net
button within 3 seconds.
button within 3 seconds.
button.
14 14