Upcon Algorithm - Main Page - TC Electronic UpCon Manual

UpCon algorithm – Main page
Fig. 37.: UpCon algorithm – Main page
UpCon English Manual (2014-10-07)
Input section
Input Select parameter
Use the Input Select parameter to select how
input signals should be selected for signal pro-
cessing.
Main Only setting
When 5.1 and Stereo signals are fed to the same
physical inputs (i.e. In 1-6), set the Input Select
parameter to Main Only. UpCon is automatically
enabled when the input format is stereo.
Main 5.1 Priority setting
When 5.1 and Stereo signals are fed to different
physical inputs (i.e. In 1-6 vs. 7-8) and the 5.1
input should have priority, set the Input Select
parameter to Main 5.1 Priority setting. UpCon is
automatically enabled when the input format is
stereo.
If both inputs are active, priority is given to the
5.1 input.
Aux Priority setting
When 5.1 and Stereo signals are fed to different
physical inputs (i.e. In 1-6 vs. 7-8) and the ste-
reo (Aux) input should have priority, set the Input
Select parameter to Aux Priority setting. UpCon
is automatically enabled when the input format
is stereo.
The UpCon algorithm
If both inputs are active, priority is given to the
Stereo (Aux) input.
In Gain parameter
Use the In Gain parameter to apply a static gain
to the currently processed signal. Parameter
range is from -18 dB to +18 dB.
If UpCon is used for ingest, better results may
be obtained by using the In Gain parameter to
get the program roughly on Target before pro-
cessing.
As UpCon has a high internal headroom, there is
no risk of clipping when positive gain is applied.
89