TC Electronic UpCon Manual page 37

Fig. 20.: OS X Network preferences
For further information, please refer to you oper-
ating system's integrated help system.
UpCon English Manual (2014-10-07)
Changing subnet mask and
TCP/IP address of a UpCon
To change the subnet mask and TCP/IP address
of a UpCon, you need to access it using a com-
puter running the TC Icon software. This means
that in case of an IP address conflict that keeps
you from accessing UpCon in the first place, you
need to change your computer's IP first as de-
scribed in the previous section.
►
Launch the TC Icon software on your com-
puter.
►
Select the particular UpCon you want to ac-
cess.
►
Click on the Frame tab.
► Select the System page.
►
Select the Setup subpage.
► Select Net.
To change the IP address:
►
Select the IP address parameter.
► Enter the new IP address.
►
Confirm by clicking Enter.
To change the subnet mask:
►
Select the IP Subnet Mask parameter.
Setting up UpCon
►
Enter the new subnet mask.
►
Confirm by clicking Enter.
34