Remote - Master - TC Electronic UpCon Manual

UpCon provides extensive remote control fea-
tures. GPI and SDI metadata allow you to tailor
remote control to your station's demands.
UpCon English Manual (2014-10-07)
Remote – Master
The Remote Master page provides an overview
of the current remote control setup. It also al-
lows you to enable the remote control features
(via GPI or SDI metadata) that you want to use.
UpCon remote control
Scene Recall section
GPI input 1 can be used for User Scene pre-
set recall (see "Library – Recall page" on page
69).
Please not that the Icon user interface is locked
when GPI is used for control.
GPI button
Use this button to enable GPI 1 input for User
Scene Recall.
An "Enable" button that controls the same func-
tion can be found on the Remote – GPI page in
the GPI 1 – Scene Recall section.
Current Scene status field
The Current Scene status field shows the name
of the currently active Scene preset. The current-
ly active Scene will be shown here wether it has
been selected via GPI or not. The name shown
here is identical to that shown on the Library –
Recall – Scene page as "Current" and on top of
the Frame – Routing page. When GPI is disabled,
"-" is shown.
57