Table of Contents
Advertisement
►
Launch TC Icon by double-clicking the ap-
plication.
TC Icon will try to establish connections to all
connected TC devices on a local network, in-
cluding your UpCon.
If a connection cannot be established, please
refer to "Networking basics and trouble-
shooting" on page 32.
If you experience technical problems during
software download or installation, please ask a
person with administrator privileges on this com-
puter for assistance.
UpCon English Manual (2014-10-07)
Updating TC Icon software
To update the TC Icon software on your comput-
er when a newer version is released,
►
quit the TC Icon software if it currently run-
ning on your Mac,
►
download and extract the newer version as
described in this section and
►
replace the currently installed version by
copying the newer version over it.
Software: TC Icon and UpCon firmware
16
Advertisement
Table of Contents
