Recovering Saved Data; Machine; Cleaning The Display; Cleaning The Feed Dog - Bernina 570 QE User Manual

> Tap «Updating Firmware».
UPDATE
> To start the firmware update, tap «Update»
Update
. Please note: The update may take several minutes. During the update, do not switch the machine off
and do not remove the USB stick.
– The machine restarts. Once the update is complete, a message appears.

Recovering Saved Data

If personal data and settings after a software update are not available anymore, they can be transferred to
the machine again afterwards.
> Insert the BERNINA USB stick which provides the saved data and settings into the USB port of the

machine.

> Tap «Home».
> Tap «Setup Program».
> Tap «Machine Settings».
> Tap «Maintenance/Update».
> Tap «Updating Firmware».
UPDATE
BERNINA USB Stick (Optional Accessory) has been removed too early
NOTICE
Saved data cannot be transferred and the machine cannot be used.
> Remove the BERNINA USB stick (optional accessory) only after the saved data has been transferred
successfully.
> Tap «Load Data».
– After the data has been transferred, a green tick is temporarily displayed.
17.2 Machine

Cleaning the Display

> Clean the display when it is switched off with a soft slightly damp microfiber cloth.

Cleaning the Feed Dog

Remaining threads under the stitch plate must occasionally be removed.
> Raise the needle and presser foot.
Care and Maintenance
165