Cutting The Buttonhole Open With The Seam Ripper; Cutting Open Buttonholes With The Buttonhole Cutter (Optional Accessory); Sewing On A Button - Bernina 570 QE User Manual

9.14 Cutting the Buttonhole Open with the Seam Ripper

> Place a pin in each end of the buttonhole to avoid accidental cutting into ends of buttonhole.
> Cut the buttonhole from both ends to the middle.
9.15 Cutting Open Buttonholes with the Buttonhole Cutter (Optional
Accessory)
> Place the fabric on an appropriate wood.
> Position the cutter in the center of the buttonhole.
> Press down on the cutter with your hand.

9.16 Sewing on a Button

The Button sew-on Program can be used to sew on buttons with two or four holes, press studs or snap
fasteners.
Recommended sewing
program:
Recommended presser foot :
Alternative presser feet:
Button Sew-on Program No. 60
Button Sew-On Foot #18
• Reverse Pattern Foot #1/1C
• Darning Foot #9
• Reverse Pattern Foot with Clear Sole #34/34C
Buttonholes
117