Working With Cord - Bernina 570 QE User Manual

Decorative Stitches

Working with Cord

The pintucks look more distinctive and relief-like when they are sewn with a supplementary cord. Choose a
cord that fits well into the grooves of the respective foot. The cord must be colorfast and shrink-proof.
> Switch off the machine.
> Remove the needle.
> Remove the presser foot.
> Remove the stitch plate.
> Open the hook cover.
> Pull the cord through the hook opening from the bottom and through the opening of the stitch plate.
> Replace the stitch plate.
> Close the hook cover.
> Make sure that the cord slides through the thread slot of the bobbin cover.
> Place the spool on the knee lifter.
> Check that the cord runs smoothly.
> If the thread doesn't glide smoothly at the hook cover, leave the hook cover open.
> If the hook cover is opened, deactivate the lower thread indicator in the Setup Program.
– The cord lies on the wrong side of the material and is hold/sewn over by the bobbin thread.
103