Embroidering Preparation; Attaching The Embroidery Module; Removing The Embroidery Module - Bernina 570 QE User Manual

13 Embroidering Preparation

13.1 Attaching the Embroidery Module

Prerequisite:
• Extension table must not be fitted.
> Make sure that the module and the machine are placed on a stable, even surface.
> Ensure that the embroidery arm can move freely.
> Carefully slide the embroidery module from left to right into the machine's embroidery module
connection (1) and the guide rail (2).

13.2 Removing the Embroidery Module

> Push the release lever (1) at the carrying handle of the embroidery module, keep it pressed and at the
same time, move the embroidery module carefully to the left.
Embroidering Preparation
133